Weird right-click eraser is active while stylus pen in air

[Soom]

I'm very often use the right-click erase option. It worked great for me and I got really used to this method, until I started using some custom tool, that I had to install because of our project. When I'm using it, and I right-click on my stylus pen, it starts erasing even when the stylus is still in the air! Then I discovered, that some other custom tools also do this, but some don't. I had to recreate one of the tools myself, because I just couldn't work this way - all my drawing was becoming crisscrossed by thin erased lines...
I tried to edit the tool, I tried to play with the profile editor for each setting, but this behavior didn't change...
Can somebody explain why this is happening???
Thanks

[Elodie]

Hello Soom,

all my drawing was becoming crisscrossed by thin erased lines...

I'm not sure to understand... Did you get that problem after using a custom brush + right click ? Did you get this when you re-open your project ?

Could you show your brush and a visual example of your problem ?

[Paul Fierlinger]

I've ran into this in the past too when drawing or erasing and even now, when I use the upper rocker switch to toggle the light table, it works just by hovering my pen over the tablet's surface and pressing the switch. I'm not so sure that it's a TVP thing though because it happens when I use my pen to control Vegas. It could be some operating system setting too. Have you tried installing the latest Wacom driver? Elodie, there is nothing to demonstrate by showing a picture; the Wacom pen just in certain mysterious situations starts working if you press the rocker switch before making contact with the tablet. Another way to avoid this is to not press the switch before touching the tablet, but then if you are still pressing the switch while raising your hand, it keeps on working/erasing where you don't want it to.

[Elodie]

Ok, thank you for your precisions Paul =)

[Paul Fierlinger]

Ok, thank you for your precisions Paul =)

HA!! It took many words.

[Soom]

Thanks for helping with the explanation, Paul ; )
I do have the latest Wacom driver installed, yes.
Right-click should work in every software while the pen is in the air, in close proximity to the tablet - that's the default functionality of the Wacom pen.
The question is, why with some brushes TVPaint recognizes tip pressure, while the pen is not even in contact with the tablet...

Actually there is a setting in Wacom options where you can choose if you want the right click to work without tapping the pen, or with it. I always used the first (the default) option, and it worked great for all I do. If I switch it to the second - Click & Tap option, then those weird brushes work normal, but all other functionality is just not convenient to me, because now I need to touch the screen with the pen every time I want to right-click... I hope I make myself clear? : /

[Soom]

I just discovered, that this issue is true to all the brushes. It was not evident to me before, because some of the brushes are set to minimal brush size 0. But as soon as the minimum size is higher, the issue always appears.
Therefore I refer it to the fact, that Wacom by default is set for the right–click to function while the pen is hovering (without the need to tap on the tablet, while pressing the right-click). But the problem is that TVP treats the right-click equally for any function, and doesn't make a distinction between using right click while drawing, and using the right–click for other functions, like opening menus etc. I'm not sure though if it's actually possible to fix in TVP software itself,
Unfortunately this specific Wacom setting is not available on a per Application basis...