The Distortion > Wrapping Grid effect

The wrapping grid is an extremely useful animation tool and is capable of distorting the images in time according to the criteria of your choice.
The Wrapping grid effect, when correctly used, can produce quite spectacular results: wave movement, 3D rotation of faces, movement of hair blowing in the wind, etc... (below, you will find a summary overview of the possibilities proposed).

(project skull.tvp)
1st imageMovementLast image

Once the effect has been placed in the FX stack, a grid is displayed on the current image.

Some hints for beginners:

* The use of two grids will be necessary for your effects to work correctly: these grids are referred to as Source and Destination grids.
The Display popup menu is used to select on which of the two grids you intend to work.

Depending on your choice, the HUD will be modified accordingly: the letter S appears when the source grid is displayed and the letter D appears if the destination grid is displayed.

Intersections in the Source gridIntersections in the Destination grid

In the HUD, when the source grid is displayed, the destination grid is always visible behind in a less bright color. When the destination is displayed, the opposite case applies.

Display of Source and Destination grids (the current grid is green, the other is blue)

* Modification of an intersection in the Source and/or Destination grid distorts the current image accordingly.
The image is distorted, stretched or contracted over a narrower or wider area on the screen so that the points on the source grid of your initial image are moved to the same location as the points on the destination grid.
Below, source and destination points on a grid with the resulting distortion.

* The Point menu is used to edit each grid point present on the screen. The latter may be identified by their position on the grid (see below).

* The first two numeric fields are used to select the number of intersection points on your grids (Source and Destination grids have the same number of intersections). You may increase or decrease the height and/or width of these grids. The limit of the grids is 50x50 intersections.

4x4 grid8x4 grid8x12 grid

The five buttons present in this panel are used respectively to:
- Edit grid points.
- Distort the grid as a whole.
- Copy the source grid to the destination grid.
- Copy the destination grid to the source grid.
- Swap source and destination grids.

Edit grid points

* When this option is enabled, each intersection point of your grid (source or destination grid) may be moved in space along three axes (width, height and depth) the effect of which will result in immediate distortion of the current image.
You may also use the predefined paths to manage intersection movement.

Above, from left to right, the initial image, movement of the destination intersection along the X and Y axes, movement of the destination intersection along the Z axis.

* It is possible to select several intersection points when the HUD is visible by drawing a rectangle inside the HUD. Once this has been done, it is easy to carry out all movements with a single click and slide on an intersection.

* It is possible to choose an intersection interpolation mode (linear, spline or smooth) in the first effect popup menu (see below).

Spline interpolationSmooth interpolationLinear interpolation

If the interpolation mode chosen is Spline, use of the [Shift] key when moving the handles enables movement of one handle at a time.

Edit grid bounding box

When the second icon is selected, it is possible to distort the current grid as a whole by rotating it or by modifying its dimensions (see below).

Original gridGrid with 30° rotationGrid with height divided by two

Swap the source and destination grids

This option is practical when creating a distortion opposite to that of the current distortion.
Below, the rear end of the arrow represents the Source point of the grid and the arrow tip corresponds to the Destination point.

Distortion : Source => destinationDistortion: Destination => Source

The AntiAliasing parameter in the last section allows to smooth the border of the image when this one is applied on the project. The options are None, Medium and Best.

Distortion of the current image in time.

We just saw how to distort an image in space using the source and destination grids. To distort the current image in time as was done for the "skull.tvp" project, you must:
* Duplicate the latter along the entire layer.
* Unactivate the previsualization of the effect (use the menu at the bottom left of the FX-Stack)
* Set the display option on Source.
* Pay attention to place intersections of the Source Grid at all strategic points on the image : eyes, teeth, etc … and ensure the grid covers the lines of your drawing.
* Copy the Source Grid to the Destination Grid.
* Reactivate the previsualization of the effect.
* Set the display option on Destination.
* Make the Destination Grid slightly different from the Source Grid for at least the first and last frames of the animation layer and then create the corresponding keys.
The result is a distortion, and consequently, a movement which takes place over a period of time.

The method described above is not the only way of using this effect. Many others exist. You should try them out and share your impressions in the on-line forum.