Camera View Vertical

Please use this part to report bugs & errors, ask questions & "How to..."
Post Reply
User avatar
toonybrain
Posts: 91
Joined: 22 Nov 2008, 17:01
Location: Pennsylvania, USA

Camera View Vertical

Post by toonybrain »

Hi all,

I searched before I posted, but I found nothing that addressed this specific, but hopefully trivial issue.

I have never used TVPaint camera, so I'm a camera noob.

I have an animated short set up for HD 1080p with a 150.00% ratio

I use Win 10 Pro and have TVPaint Pro (latest edition).

When I turned on the camera, the view shows vertical. But I don't want it vertical; I want it horizontal.

So, I opened some other projects with the same settings above, and the camera view is horizontal.

So, what could be different in this project than the others to cause my camera box to be vertical rather than horizontal? Where do I look and what do I do to fix it?

Thanks for your input, it's always appreciated.
Attachments
TVPaint camera issue.png
TVPaint camera issue.png (46.84 KiB) Viewed 4772 times
User avatar
slowtiger
Posts: 2889
Joined: 08 May 2008, 21:10
Location: berlin, germany
Contact:

Re: Camera View Vertical

Post by slowtiger »

What happens if you click the camera tool > Parameters and change the dimensions there?
TVP 10.0.18 and 11.0 MacPro Quadcore 3GHz 16GB OS 10.6.8 Quicktime 7.6.6
TVP 11.0 and 11.7 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
TVP 11.7 Mac Mini M2pro 32GB OS 13.5
User avatar
Peter Wassink
Posts: 4283
Joined: 17 Feb 2006, 15:38
Location: Amsterdam
Contact:

Re: Camera View Vertical

Post by Peter Wassink »

Per default the camera uses the resolution of the project you use it in. So was the project at some point vertical perhaps?
Anyway, you can change it by going to the parameters panel which you can open from the Tool:Camera panel
when you uncheck the Preserve Proportion option you can set it to your desired size.
Peter Wassink - 2D animator
• PC: Win11/64 Pro - AMD Ryzen 9 5900X 12-Core - 64Gb RAM
• laptop: Win10/64 Pro - i7-4600@2.1 GHz - 16Gb RAM
User avatar
toonybrain
Posts: 91
Joined: 22 Nov 2008, 17:01
Location: Pennsylvania, USA

Re: Camera View Vertical

Post by toonybrain »

Thanks to you both slowtiger and Peter Wassink. Will do.
Post Reply